Lars Thrane LT-300, Руководство пользователя и инструкция по установке

Страница: 16 / 47

LT-300 User & Installation Manual Installation
Lars Thrane A/S www.thrane.eu 8 of 39
F
IGURE
11: P
OLE MOUNT INSTALLATION STEP
3 (
LOCATE AN
APPROPRIATE LOCATION
)
Step 2: Please refer to NMEA 0183 Baud Rate on page 20 for details on NMEA 0183 baud rate settings and
LED Color Description on page 20 for LED description. Figure 9 is illustrating the bottom side of the LT-300
GNSS Receiver; highlighting the 2-color LED, the locking symbols, and the safety lock hole.
Step 3: Locate an appropriate location for the pole mount installation. See drawings under step 3 with
respect to pole mount installation.
IMPORTANT: Make sure that the LT-300 GNSS Receiver is capable of receiving signals from the GNSS
satellites (see Mounting and installation considerations on page 5 for details) and no compass
within 0.3 m. (1 ft.) of the unit. Mount the LT-300 GNSS Receiver at least 1 m. away from VHF,
UHF, MF-HF, Inmarsat, Iridium, etc. radio transmitting equipment. Make sure that the LT-300
GNSS Receiver minimum has a 20-degree angle towards a radar antenna (above or below).
F
IGURE
9: P
OLE MOUNT INSTALLATION STEP
2 (
BOTTOM SIDE
OF
LT-300 GNSS R
ECEIVER
)
F
IGURE
10: P
OLE MOUNT INSTALLATION STEP
3 (
LOCATE
AN APPROPRIATE LOCATION
)