LT-4200 User & Installation Manual Rev. 1.00
Web server
Lars Thrane A/S
www.thrane.eu
Page 78 of 128
Web server
The LT-4210 Control Unit has a built-in webserver, which can be accessed from the Ethernet (RJ45)
interface from the back side of the control unit. A PC must be connected to the control unit, either directly
by connecting an Ethernet cable between a PC and the LT-4210 Control Unit, or by connecting the LT-4210
Control Unit to a Local Area Network (LAN), to where the PC is connected.
NOTE
:
The IP address allocated to the LT-4210 Control Unit, is shown in the GUI (Menu -> System -
> Network: IP Address).
The functionality of all web pages is described in further detail in the following sections. Some of the
sections will refer to other sections in this User & Installation Manual, e.g. hardware interfaces.
NOTE
:
All web
pages’
functionality will be described in detail for the LT-4200 system. It is the
intention that the web pages should be used during the installation and configuration of
the system. During normal operation of the system, it should not be necessary to access
the web pages.
Figure 93: Web server (System dashboard)
Содержание Iridium Certus 200
Страница 2: ......
Страница 140: ......
Страница 141: ...Lars Thrane A S Skovlytoften 33 2840 Holte Denmark www thrane eu...