4
®
Hang the Ring Pool Surface Skimmer onto the top
inflatable ring of the ring pool and then loosen the Lock
Nut
5
in anti-clockwise by hand. Push the Ring Pool
Holding Frame to fix the Ring Pool Surface Skimmer on
the ring pool. (Push the Release Button to loosen the
Ring Pool Holding Frame Rear
3
).
4
5
3
3
5
Push
Release Button
Tighten
If the Suction Fitting of your pool is the same type as illustrated in
6.2
,
remove the Suction Fitting Screen from the Suction Fitting Base first.
Attach the Adapter to the Suction Fitting Base and fix tightly.
6.2
9
7B
Suction Fitting Screen
Suction Fitting Base
If the Suction Fitting of your pool is the same type as
illustrated in
6.1
, attach the Adapter to the Suction
Fitting and screw tightly.
6.1
7A
9
8
Suction Fitting
7A
7B
Loosen the Lock Nut
5
in anti-clockwise by hand
and adjust the position of the Skimmer Canister
1
on the Ring Pool Holding Frame. The position of the
Skimmer Canister
1
should be set as the pool
water surface between the water level marking on
the Skimmer Canister
1
. Tighten the Lock Nut
5
in clockwise to hold the Skimmer Canister
4
in your
setting position.
5
5
Tighten
Loosen
1
4
7B
8
Then, connect the Hose
8
to the adapter, and tighten
the Hose Clamp
9
.
7
7A
9
8
