Larius VEGA 23:1, Инструкция по эксплуатации и техническому обслуживанию

Страница: 48 / 52

46
VEGA 23:1
English
This safety instructions refer to the installation, use and maintenan-
ce of
LARIUS piston pneumatic transfer pumps
VEGA
series for the
use in potentially explosive areas in presence of gas or vapours.
These instructions should be followed in addi-
tion to the instructions provided in the use and
maintenance manual.
The main characteristics of piston pneumatic transfer pumps
VEGA serie are indicated in the table below:
LARIUS piston pneumatic transfer pumps VEGA series are
mechanical equipment belonging to group II, for
the use in areas in presence of gas which are
classified as IIB
(category 2 G) . They have been
designed and manufactured in compliance with
the directive ATEX 94/9/CE, according to european standards
EN 1127-1, EN 13463-1ed EN 13463-5.
Max number of cycles per minute:
60
Room temperature: -20°C÷ +60°C
Fluid max temperature: [°C]: 60°C
SAFETEY INSTRUCTIONS FOR THE USE OF
PISTON PNEUMATIC TRANSFER PUMPS VEGA SERIES
IN POTENTIALLY EXPLOSIVE ENVIRONMENTS
IN PRESENCE OF GAS OR VAPOURS.
91360 91362 5:1 3 ÷ 8 bar GC 3/8" Ball valve GC 3/4" 40 bar 10 l/min
91365 91361 5:1 3 ÷ 8 bar GC 3/8" Ball valve GC 3/4” 40 bar 10 l/min
91368 91363 5:1 3 ÷ 8 bar GC 3/8" Ball valve GC 3/4” 40 bar 10 l/min
91501 91503 23:1 3 ÷ 8 bar GC 3/8" Ball valve GC 3/8" 184 bar 2,6 l/min
91910 - 45:1 3 ÷ 8 bar GC 3/8" Washer GC 3/8" 360 bar 1 l/min
91911 - 45:1 3 ÷ 8 bar GC 3/8" Washer GC 3/8" 360 bar 1 l/min
91912 - 45:1 3 ÷ 8 bar GC 3/8" Washer GC 3/8" 360 bar 1 l/min
Type Ratio Supplied Ø Air Ø product Ø product max operat. max
Standard St. steel pressure inlet feeding outlet pressure rate
ATEX CERTIFICATION
ATEX CERTIFICATION
AA AA
DESCRIPTION
AB AB
TECHNICAL FEATURES