13
PEGASO
English
M
N
MATERIAL
1
2
3
4
5
6
WASHING OF THE
NEW EQUIPMENT
• The equipment has already been adjusted at our factory
with light mineral oil left inside the pumping group as
protection. Therefore, wash with diluent before sucking
the product.
• Pour 4 litres of clean water into hopper (
1
).
• Ensure the gun is without nozzle (
2
).
• Turn the sprayer on, adjust the air pressure (
3
).
• Turn the “Pump Rotation” selector clockwise.
• Point the gun into the tank keeping and keep pressed
the trigger lever (
so as to drain the oil inside
) till a clean
solvent comes out. Now, release the lever (
4
).
•
Trigger gun into waste pail until hopper no longer
contains water and all water is removed from hose
and pump system (
5
).
• Insert the gun trigger lock and assemble the nozzle
(
6
).
MIxING MATERIAL
• Make sure the product is suitable to be used with a
spray gun.
• Mix material in a separate container
• Agitate to smooth, lump-free consistency.
Make sure the product to be used is com-
patible with the materials employed for
manufacturing the equipment. Because
of that, please contact the supplier of the
product.
WATER
NOTE:
for a faster washing cycle, connect a hose that is connected to the water mains to the hose adaptor.
(as illustrated on p. 23). Turn the pump on and let it run first in one direction and then the other, then
completely discharge the water using the spray gun or the recycle hose.
Содержание Pegaso
