background image

Ediz. 010 - 06/2015

•  NEVER SPRAY OVER FLAMMABLE PRODUCTS OR SOL-

VENTS IN CLOSED PLACES.

•  NEVER USE THE EQUIPMENT IN  POTENTIALLY EXPLO-

SIVE ENVIRONMENTS.

The high speed of  the product in the hose can create 
static electricity through discharges and sparks. 
It is suggested to earth the equipment. 
The pump is earthed through the earth cable of 
the supply. 
The gun is earthed through the high pressure 
flexible hose.  
All the conductors near the work area must be 
earthed.

Always check the product is compatible with the 
materials composing the equipment 

(pump, spray 

gun, flexible hose and accessories)

 with which it 

can come into contact. Never use paints or sol-
vents containing halogen hydrocarbons 

(as the 

methylene chloride)

If these products come into contact with aluminium 
parts can provoke dangerous chemical reactions 
with risk of corrosion and explosion.

IF THE PRODUCT TO BE USED IS TOXIC, AVOID 
INHALATION AND CONTACT BY USING PRO-
TECTION GLOVES, GOGGLES AND PROPER 
FACE SHIELDS.

TAKE PROPER SAFETY MEASURES FOR THE 
PROTECTION OF HEARING IN CASE OF WORK 
NEAR THE PLANT.

Electrical safety precautions

•   Check the switch is on the "OFF" position before connecting 

the cable to the mains. 

•  Never carry a plugged-in equipment.

•  Disconnect the equipment before storing it and before 

performing any maintenance operation or replacing of 
accessories.

•  Do not carry the equipment neither unplug it by pulling the 

electric cable. 

•  Protect the cable from heat, oil and sharp edges.

•  Take care when the pumping rod is moving. 
 

Stop the machine whenever someone is within its vicinity. 

•  Repairs of the electrical equipment should only be carried 

out by skilled personnel, otherwise considerabledanger to 
the user may result.

Never attempt to tamper with the calibre of in-
struments.

•  When the tool is used outdoor, use only an extension cable 

suited for outdoor application which is duly marked.

The conditions of guarantee do not apply in the 

following situations:

- improper washing and cleaning of components 

causing malfunction, wear or damage to the 
equipment or any of its parts;

- improper use of the equipment;
- use that does not conform with applicable na-

tional legislation;

- incorrect or faulty installation;
- modifications, interventions and maintenance that 

have not been authorised by the manufacturer;

- use of non-original spare parts or parts that do 

not correspond to the specific model;

- total or partial non-compliance with the instruc-

tions provided. 

CONDITIONS OF GUARANTEE

www.larius.eu

JOLLY

8

Содержание Giotto

























































Отзывы: