F3
F4
F4
F6
F5
F7
Ed. 002 - 01/2017
WASHING OF THE NEW EQUIPMENT
• The equipment has already been adjusted at our factory
with light mineral oil left inside the pumping group as
protection. Therefore, wash with diluent before sucking
the product.
• Fill the product tank with wash fluid.
• Clean the inside of the tank with a brush.
• Press the switch (
F4
) of the equipment “
ON”
(I)
.
• Pull the lever (
F4
) for the first cold start up.
• Ensure the gun (
F3
) is without nozzle.
• Bring the accelerator lever (
F6
) to about 1/2 of its run.
• Open the fuel tap (
F5
) and position it to "
ON
".
• Pull the start up cord (
F7
).
• Turn the equipment’s switch (
F8
) to
ON
(I)
in order to enable
the control Head Liner panel.
• Turn pressure regulating knob (
F9)
clockwise a little so
that the machine idles.
www.larius.eu
DRAGON LINER
11