Larius DALI LINER PLUS HAND PUSH, Инструкция по эксплуатации и техническому обслуживанию

Страница: 19 / 44

Ediz. 005 - 09/2015
www.larius.eu
DALì LINER PLUS
13
• Open the recirculating-safety valve (
F16).
F18
• Start the combustion engine following the indications provi-
ded in the chapter “STARTING COMBUSTION ENGINE”.
• visually check that the wash fluid starts to re-circulate within
the tank ( F18).
• Rotate the pressure setting knob (
F17) slightly clockwise so
that the machine operates at minimum power.
• Once the wash fluid has circulating enough, close the
recirculating-safety valve (
F16).
F14
F19
• Remove the gun ( F14) from its support and point it into a
container ( F19). Hold the trigger down
(to perform the cle-
aning) until clean solvent comes out, or else until all of the
wash fluid has been expelled from the tank.
Repeat the same operations with clean solvent if
necessary.
• After having completed the wash operations, bring the
handle to its MIN position ( F17) and point the gun (F14) into
a collection container ( F19) and press the trigger to release
the residual pressure. Release the trigger when finished.
NEVER spray solvents indoors. In addition, it is
recommended to keep away from the pump in
order to avoid the contact between the solvent
fumes and the motor.
F16
CLOSE
F16
OPEN
F17