Larius 4, Инструкция по эксплуатации

Страница: 11 / 20

Edit. 002 - 06/2019
www.larius.eu
LARIUS 4
11
LARIUS
LARIU
S
1
sI
NO
Check all the connection fittings of the com-
ponents (pump. flexble hose, etc.) before using
the equipment.
• Dip the suction hose into the tank of the product.
• Let compressed air flow to the pump. Adjust air pressure
to the minimum level necessary to the working of the pump
continually
• The pump will start and sto when all the product chamber
will be full. Each time the delivery valve is open, the pump
will start again to work.
WarNING! avoid pump iding because it could da-
mage the pneumatic system and the membranes.
eMerGeNCY stOp
In the case of an emergency, promptly close
the air opening/closing valve (1) blocking motor
power.
H
WOrKING
To avoid risks after stops, keep the valve open and completely
discharge the pump.
pOsItIONING DIaGraM
Fix the pump on a base by using the supporting brackets holes.
NeVer INstaLL the pump upside-down or
inclined
tUNING
Connect the pump with a grounding cable as indicated in
the figure.