7
Sonic Guard/USB Mat
Installation and Operation
You will need to configure the Sonic Guard/USB Mat for the keystrokes you currently use to lock your computer. If you click
on the
Misc
folder, there are some quick settings that will help get Windows users quickly configured with the most common
settings for these operating systems.
By selecting the
Win2K option
the Sonic Guard/USB Mat will be set with:
Walk-Away:
CTL-ALT-DEL+K+BaEscape
Walk-To:
CTL-ALT-DEL
By selecting the
WinXP Classic Logon
Prompt
option the Sonic Guard/USB Mat will be set with:
Walk-Away:
CLGUI-L
Walk-To:
CTL-ALT-DEL
By selecting the
WinXP Welcome Screen or Vista / Win7 Logon option
the Sonic Guard/USB Mat will be set with:
Walk-Away:
LGUI-L
Walk-To:
None
Windows users will need to make a short-cut on the desktop to launch a screensaver. The shortcut needs to have a shortcut
key assigned to it. This key is what needs to be assigned in the
Walk-Away
sequence. See Appendix I for this procedure.
After selecting your Quick Setting, be sure to click the
Apply
button to save your new settings.
Note:
Once you have set the Sonic Guard/USB Mat with keystrokes, these keystrokes will be sent during the next Walk-Away
event. To prevent keystrokes from being sent while the configuration program is being used, click the
Halt Key Sends
check
box in the lower left corner of the application screen. This will temporarily stop sending the keystrokes. This check box is
cleared once the application has been exited.
Configuration: Walk-Away / Walk-To (continued)
Figure 3: Sonic Guard/USB Mat
Misc
Configuration Screen