5
Sonic Guard/USB Mat
Installation and Operation
Attaching the Sonic Guard/USB Mat
Configuration
If your system meets requirements, you can then attach the Sonic Guard or USB Mat in your workspace. Connect the USB
cable to an open USB port on your computer. Windows will load the appropriate USB keyboard drivers once the USB device
is attached. If the USB Keyboard drivers are not currently resident on your system, you will be asked to place your Windows
Operating System disk into your CD drive. Follow the directions provided by Windows during this install.
Note
:
There are no USB drivers provided with the Sonic Guard software. All USB drivers will be provided by the Windows
operating systems.
The Sonic Guard/USB Mat has several configurable settings that are controlled via the Sonic Guard/USB Mat Configuration
program. After downloading the software, select the file and run the supplied program (Sonic Guard.exe). Click on the
Sonar
tab and you will see the screen below.
Figure 1: Sonic Guard/USB Mat Sonar Configuration Screen