LapSafe Mentor, Руководство пользователя

Страница: 6 / 11

10 11
This highly intelligent system is only available on the Mentor™
SmartLine™. It automatically senses when a module (of five devices) is
fully charged and it then stops charging the module to avoid wasting
power; thus making vast energy savings. All devices are still charged
simultaneously in the fastest possible time.
Charging Devices - ChargeLine™
If you have chosen ChargeLine™ then your trolley will be configured to
allow you to use the AC adaptors that are supplied with your device. Your
trolley will have either a three pin 13 amp socket fitted to each shelf or a
European socket. (Figure 9)
• Neatly place one AC adaptor into each charging bay and plug into the
white charging socket provided.
• Place one device onto each shelf and connect the corresponding AC
adaptor to each laptop.
Note:
No power will be supplied to the devices until the
front doors have been securely closed – this is a safety
feature to ensure no user comes into contact with mains voltage.
Figure 10
Connecting a network cable
Figure 11
Network connectivity
Mentor Options
Printer
If you have a printer module built into your trolley please refer to your
printer manual for guidance on how to use the printer and to load and
change the printer cartridges.
Figure 9
ChargeLine
TM
Module