13
Copyright LapSafe® Products
The Mentor™ Range - User Manual
6. Mentor options
Printer
If you have a printer module built into your trolley please refer to your printer
manual for guidance on how to use the printer and to load and change the printer
cartridges.
The printer module has been connected into the trolley and once you have
connected the trolley to the mains power it will be ready to use.
If you wish to use your own printer housed on the top of the trolley a mains outlet
has been provided at the rear of the trolley and also a network socket (A network
socket is an option or standard with Data Transfer (DTM)). Care should be taken
when moving the trolley and on no circumstances should the trolley be moved
without disconnection of the power sockets and/or network connection. The
trolley should not be moved with the printer on the top of the unit.
Network connectivity
If your trolley features network connectivity, you can plug the trolley into your
network by connecting a standard network cable into one of the auxiliary points
on the back of the trolley.
Data transfer (DTM)
If your purchase includes DTM your trolley will be network ready (these are the
red network cables within your charging bays), you can update all of your laptops
simultaneously inside the trolley using Wake on LAN software.
•
Make sure that the trolley is connected to the network and switched on
•
Plug each individual red DTM cable inside the trolley into the network
ports of each laptop and ensure that the trolley is switched on. If you have
a ChargeLine™ trolley (uses AC adaptors) close the trolley’s doors before
beginning the update.
•
The laptops are now ready to receive updates
