Apollo-V:
Asennus- ja käyttöohje/Installation and user manual/Bruksanvisning
3
DECRASE INCREASE SPEED DISPLAY/TIMER INDICATOR TIMER LIGHT
KÄYTTÖ
USE
ANVÄNDNING
The appliance starts with the key for speed 1. The speed increases with every push of the key to the next higher
speed 2,3, or 4. Speed 4 is intensive speed and only on for 5 minutes before returning to speed 3. The speed is reduced and the
appliance is turned off using the key.
When pressing the timer key while the engine is running at speed 1, 2, or 3, the engine stops after a set time,
extracting the fumes of a hot pan on the cooker while the pan is cooling.
When the timer key is pressed, the number 0 will begin to flash on the display. Within 20 seconds the key can then
be pressed to set the timer: the number on the display changes to represent the number of times (1,2,3…) the key is pressed,
which in turn represents the timer setting (1=10, 2=20, 3=30, 4=40, 5=50, 6=60, 7=70, 8=80, 9=90 minutes).
Pressing the key briefly turns the lights on / off. The lights turn on at full luminous intensity suitable for working. In addition,
the lights have a three-stage dimming function. When the lights are on at full power, pressing the key for three seconds will dim the lights
to general lighting. When pressing the key once more for three seconds, the lights dim to ambient lighting. The lights always turn on at full
luminous intensity.
2.
CONTROL PANEL FUNCTIONS
EN
■
The cooker hood is designed for extracting cooking fumes and is for domestic use only.
■
Unplug the appliance or remove the fuse before cleaning or maintenance.
■
Never use the appliance without a grease filter.
■
Do not store or place anything on top of the appliance.
■
Make sure there is adequate exchanging air from outside in the room by, for example, opening a window when the hood is in use.
Inadequate ventilation prevents the hood from working properly.
■
Do not flambé or set an open fire under or near the appliance.
■
The amount of grease inside the hood and the grease filters should be monitored regularly by removing the grease filter and
cleaning both the appliance and the grease filter when necessary.
■
The grease filter must be cleaned regularly (whenever necessary or at least every 3 months) to prevent risk of fire.
The grease filter can be washed in a dishwasher. Do not use the longest and hottest washing programs. The grease filters will wear
out and should be replaced when their surface/color begins to be worn or faded.
■
The charcoal filter must be replaced at least twice a year. However, the frequency in which the filters need to be replaced
depends on usage.
■
The machine-washable LongLife charcoal filters (accessory) are cleaned and activated by washing them in the dishwasher in 65 degrees.
Please note that no dishes are to be washed at the same time as the charcoal filter. Afterwards the filters are placed in a 100-degree
oven on the grid for 10 minutes with upper and lower heat set. Cleaning and activating the filters should be done approximately every
two months. After three years, the efficiency of the LongLife filters will be reduced by approximately 50% of the original.
