Installation for kart
Attach the GPS receiver’s top side with logo
horizontally toward the sky on the front panel by
two-sided tape or hook & loop fastener. Please
provide the installation bracket as per your
requirement.
Installation for motorbike
Attach the GPS receiver’s top side with logo
horizontally toward the sky on the rear cowling
by two-sided tape or hook & loop fastener.
Installation for car
Attach the GPS receiver’s top side with logo horizontally toward the sky on the
dashboard by two-sided tape or hook & loop fastener. Some kinds of windscreens
including heat-reflecting glass would be difficult to acquire the GPS satellite. In
that case, please attach on the roof.
Caution for installation
-
To avoid the noise from the engine ignition, put the receiver away from the
engine, and do not fix the GPS receiver's cable together with other sensors'
cables.
-
If the GPS receiver is subjected to strong vibration, malfunction may occur.
Place low-repulsion urethane (sponge or similar) around the sensor to absorb
vibration.
-
If using the GPS receiver in the rain, wrap it with plastic bags so as not the
receiver and cables wet.
- 3 -
