How to install GPS receiver
1. Put the top side with logo horizontally toward the sky on the location where the
signal from the satellite can be received well.
2. Connect to 12V power battery or 9V square type battery on the other side of the
power connector, and insert the connector to the power port of the receiver.
* The power connector’s red line is into the plus(+) of the 12V power battery or
9v square battery, the black line is into the minus(-).
* Available voltage is DC7.5V to DC14.5V.
3. Connect the communication cable to the Lapcom COM port.
LAPCOM
COM port
Use 12V power
or 9V square
type battery
Power port
Power connector
Communication
cable
battery
square
type
battery
Red (+)
Black (-)
Battery snap
- 2 -
