3.
Each product can be connected directly to each other by fitting the connecting end piece into
the receptive socket of the other, so forming a line of products. (see diagram 1). The other option
is to use the connecting lead to join the products together as desired (see diagram 2).
4.
Generate the layout of your choice and measure the positions of the number of units. Measure
the distance between the bracket slots at either end of the product (see diagram 3). If you wish
to fix the product to a corner position use corner bracket (A). Use the surface bracket (B) to fix to
a flat surface (see diagram 4).
5.
Ensure you route cables to avoid accident or damage occurring. Cables can be secured to a
mounting surface after installation.
6.
Connect to a mains supply either directly to a fused outlet or attach a plug.
7.
If a connector end is not being used remember to replace the covering cap (see diagram 5).
This is
important
to prevent accidental electric shock.
E
L
N
Neutral
Live
Fuse
3 Amps
Cord Clamp
BLUE
BROWN
Wiring -
This product is double insulated and must not be earthed.
Care & Use
•
Always switch off or disconnect from the mains when cleaning the product.
•
Wipe clean with a soft dry cloth. Never use scourers, abrasives or chemical cleaners.
Do not allow moisture to come into contact with electric parts.
•
This product uses LEDs (Light Emitting Diodes) and is maintenance free. The LEDs give
you several years of use without ever needing to changing a bulb. There are no user
serviceable parts in this kit and should malfunction or damage occur, the kit must be
replaced. The LEDs are not replaceable.
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or retailer for recycling advice.
Page 2 of 2
29.09.11
1
2
5
This product can be connected to the mains supply in two ways:
1.
Directly wire the power lead to a fused outlet socket. The Brown wire
must be connected to the terminal marked L or coloured red. The Blue
wire must be connected to the terminal marked N or coloured black.
Use a 3 Amp Fuse.
3
Example showing surface bracket
A
B
Important!
4
2.
Attach an approved 3 Amp fused plug to the end of the power lead.
The plug must wired as shown here.
3.
Under no circumstances must the connecting lead be modified for use as a power lead.
This would make the exposed input socket live.
Powersmith Ltd, BA22 8RT
