
9
Enter/Exit Settings Interface: Long press the Mode Button & Power Button
together for 3 seconds.
P00-P09 Switch: Short press the Mode Button to switch code number.
Value Adjustment: Short press the Mode Button or Power Button to adjust.
Parameters Settings
Code Number
P00
Wheel diameter setting
Programmed by the controller,
not available.
P01
Under-voltage setting
The standard parameter should
be 50.5 for the LAOTIE SR10
electric scooter.
Not recommend to change.
P02
Number of pole pairs
setting
Programmed by the controller,
not available.
P03
Speed signal selection
setting
Programmed by the controller,
not available.
P04
KM/ Mile selection
setting
0 is Km, and 1 is Mile.
P05
Non-zero and zero
start selection
Programmed by the controller,
not available.
P06
Cruise and Non-cruise
selection
0 is Non-cruise, and 1 is Cruise.
Meaning
Detail