Lanzar Vibe 440PSU, Руководство пользователя и инструкция по установке

Страница: 7 / 8

1.Read this manual carefully and in its entirety before installing this equalizer.
2.Always disconnect the battery or remove the fuses for circuits you will be working on.
3.Check for clearance of any hazards such as wiring harnesses or heater core before
mounting the equalizer to any panels in the vehicle.
4.Mount the equalizer in a location that is easy to access and won't be distracting to
vehicle operation while making adjustments.
5.Route all power wires and audio cables away from sharp metal edges that can cause
shorts to ground and any moving parts that can tangle the wires such as heater controls
or wiper motors.
6.Route all power and signal cables as far as possible from other vehicle wiring harnesses.
Loom when appropriate.
7.It is recommended that the equalizer be grounded directly to the chassis of the head
unit. The head unit should be grounded at a chassis point (preferably bare or scraped
sheet metal) other than the factory head unit ground wire or under dash brackets.
8.Use only the supplied machine screws to mount the equalizer or damage to the circuitry
could occur.
6.
Installation Instructions