![background image](http://html.mh-extra.com/html/sony/cmt-cpz1dab/cmt-cpz1dab_operating-instructions_420297001.webp)
CMT-CPZ1DAB.GB.2-691-497-14(1)
WARNING
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
To reduce the risk of fire, do not cover the ventilation of
the apparatus with newspapers, tablecloths, curtains, etc.
And do not place lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not place
objects filled with liquids, such as vases, on the apparatus.
Connect the unit to an easily accessible AC outlet. Should
you notice an abnormality in the unit, disconnect the
main plug from the AC outlet immediately.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
Do not expose batteries or apparatus with battery-
installed to excessive heat such as sunshine, fire or the
like.
2-691-497-14(1)
Micro HI-FI
Component System
Operating Instructions
GB
CMT-CPZ1DAB
© 2006 Sony Corporation
Printed in China
Hooking up the system securely
Except for customers in the U.S.A.
and Canada
This appliance is classified
as a CLASS 1 LASER
product. This marking
is located on the rear
exterior.
European model only
Excessive sound pressure from earphones and
headphones can cause hearing loss.
Notice for customers: the following
information is only applicable
to equipment sold in countries
applying EU Directives
The manufacturer of this product is Sony Corporation,
1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan.
The Authorized Representative for EMC and product
safety is Sony Deutschland GmbH, Hedelfinger Strasse
61, 70327 Stuttgart, Germany.
For any service or guarantee matters please refer to
the addresses given in separate service or guarantee
documents.
Disposal of Old Electrical & Electronic
Equipment
(Applicable in the European Union and
other European countries with separate
collection systems)
This symbol on the product or on its packaging indicates
that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and
electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
Applicable accessories: Remote commander
Note on DualDiscs
A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.
Music discs encoded with copyright
protection technologies
This product is designed to playback discs that conform
to the Compact Disc (CD) standard. Recently, various
music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and Thomson.
Antennas
Find a location and an orientation that provide
good reception, and then set up the antenna.
Keep the antenna away from the speaker cords and
the power cord to avoid picking up noise.
With a DAB external antenna (not supplied), you
can obtain higher DAB broadcast sound quality.
We recommend that you use the supplied FM/DAB
lead antenna only temporarily until you install a
DAB external antenna.
Before unplugging the DAB antenna, make sure
the system is turned off to preserve your own DAB
settings.
FM/DAB lead antenna
(Extend it horizontally.)
Connect brown side
Power
Connect the power cord to a wall socket.
If the plug does not fit the wall socket, detach the supplied
plug adaptor (only for models equipped with an adaptor).
Right speaker
Wall socket
Left speaker
Basic Operations
Before using the system
To use the remote
Slide and remove the battery compartment lid
, and
insert the two supplied R6 (size AA) batteries,
side
first, matching the polarities shown below.
Notes on using the remote
With normal use, the batteries should last for about six months.
Do not mix an old battery with a new one or mix different types of
batteries.
If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
To set the clock
1
Turn on the system.
Press
(power)
.
2
Select the clock set mode.
Press CLOCK/TIMER SET
on the remote. If the
current mode appears on the display, press
/
on the remote repeatedly to select “CLOCK SET?”
and then press ENTER
on the remote.
3
Set the time.
Press
/
on the remote repeatedly to set
the hour, and then press ENTER
on the remote.
Use the same procedure to set the minute.
The clock settings are lost when you disconnect the
power cord or if a power failure occurs.
To run the DAB Automatic Scan
When you turn on the system for the first time after
you purchase the system, DAB Automatic Scan starts
automatically and creates a list of available services.
If you want to run the DAB Automatic Scan again,
perform the procedure below.
1
Press DAB AUTO SCAN
on the unit.
“DAB Auto Scan? Push ENTER” appears.
2
Press PUSH ENTER on the unit (or ENTER on the
remote)
.
Scanning begins. “DAB Auto Scan” appears.
Depending on the DAB services available in your area,
scanning may take a few minutes.
When scanning is complete, a list of available services
is created.
Notes
If your country or region does not support DAB broadcast, “No
Service” appears.
Do not press any button on the unit or the remote during DAB
Automatic Scan. Scanning is interrupted and service list may not be
created properly. In this case, run the DAB Automatic Scan again.
If you move to another area, repeat this procedure to store the
stations for your new area.
This procedure clears all previously stored presets.
Before unplugging the DAB antenna, make sure the system is turned
off to preserve your own DAB settings.
This tuner does not support data services.
Selecting a music source
Press the following buttons (or press FUNCTION
repeatedly).
To select
Press
CD
CD
on the remote.
Tuner
TUNER/BAND
.
DAB
DAB
on the remote.
Tape
TAPE
on the remote.
Component (connected
using an audio cord)
FUNCTION
repeatedly
until “MD” appears.
Adjusting the sound
To adjust the volume
Press /
on the remote (or turn the
VOLUME control on the unit)
.
To add a sound effect
To
Press
Generate a more
dynamic sound
(Dynamic Sound
Generator X-tra)
DSGX
on the unit.
Set the sound effect
EQ
on the remote
repeatedly to select “BASS”
or “TREBLE,” and then
press +/
on the remote
repeatedly (or turn the BASS
or TREBLE control
on the
unit) to adjust the level.
Playing a CD/MP3 disc
1
Select the CD function.
Press CD
on the remote.
2
Load a disc.
Insert a disc in the disc slot
with the label side up.
3
Start playback.
Press
(play)
on the remote (or CD
(play/
pause)
on the unit).
To
Press
Pause playback
(pause)
on the remote (or
CD
(play/pause)
on the
unit). To resume play, press the
button again.
Stop playback
(stop)
.
Remove a disc
Press CD
(eject)
on the
unit.
Select a group on an
MP3 disc
+/
. Or turn the jog dial
on the unit and press PUSH
ENTER
on the unit (turn the
jog dial
on the unit during
playback until “GROUP” appears,
and then press PUSH ENTER
on the unit to select the desired
group).
Select a track or file
/
(go back/go forward)
. Or turn the jog dial
on
the unit and press PUSH ENTER
on the unit. To cancel, press
CANCEL
on the unit.
Find a point in a
track or file
Hold down
/
(rewind/
fast forward)
during playback,
and release the button at the
desired point.
Select Repeat Play
REPEAT
on the remote
repeatedly until “REP” or
“REP 1” appears.
To change the play mode
Press PLAY MODE
repeatedly while the player is
stopped. You can select normal play (“ ” for all MP3
files in the group on the disc), shuffle play (“SHUF” or
“ SHUF*”), or program play (“PGM”).
* When playing a CD-DA disc,
(SHUF) Play performs the same
operation as SHUF Play.
Notes on loading discs
When you turn on the system, the disc is not pulled into the disc slot
until “No Disc” appears in the display. Do not attempt to push in the
disc until “No Disc” appears.
If you load a disc that is not playable by this system, it will be ejected
automatically.
Do not load an 8 cm disc with an adaptor. Doing so may cause the
system to malfunction.
When you remove a disc, handle the disc by its edge and pull it
straight out of the disc slot. Do not touch the surface.
Note on the jog dial
Only the first 9 characters are displayed when performing the group
search, track search, or file search.
Notes on Repeat Play
All tracks or files on a disc are played repeatedly up to five times.
“REP 1” indicates that a single track or file is repeated until you stop
it.
Notes on playing MP3 discs
Do not save other types of files or unnecessary groups on a disc that
has MP3 files.
Groups that have no MP3 files are skipped.
MP3 files are played back in the order that they are recorded onto
the disc.
The system can only play MP3 files that have a file extension of
“.MP3.”
If there are files on the disc that have the “.MP3” file extension,
but that are not MP3 files, the unit may produce noise or may
malfunction.
The maximum number of:
groups is 256 (including the root folder).
MP3 files is 511.
MP3 files and groups that can be contained on a single disc is 512.
directory levels (the tree structure of files) is 8.
Compatibility with all MP3 encoding/writing software, recording
device, and recording media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted audio or may not play
at all.
Notes on playing multisession discs
If the disc begins with a CD-DA (or MP3) session, it is recognized as
a CD-DA (or MP3) disc, and other sessions are not played back.
A disc with a mixed CD format is recognized as a CD-DA (audio)
disc.
Listening to the radio
Before you can receive DAB, you must complete the
DAB Automatic Scan procedure (see “Before using the
system”).
1
Select “DAB,” “FM” or “AM.”
Press TUNER/BAND
repeatedly. You can also
select DAB directly by pressing DAB
on the
remote.
2
Select the tuning mode.
Press TUNING MODE
repeatedly until “AUTO”
appears.
3
Tune in the desired station.
Press +/
on the remote (or /
on the
unit)
. Scanning stops automatically when a station
is tuned in, and then “TUNED” and “STEREO” (for
stereo programs) appear.
When you tune in a DAB station or an FM station that
provides RDS services, the service name or station
name appears on the display.
To stop automatic scanning (FM/AM bands
only)
Press
(stop)
on the remote.
To tune in a station with a weak signal (FM/AM
bands only)
If “TUNED” does not appear and the scanning does not
stop, press TUNING MODE
repeatedly until “AUTO”
and “PRESET” disappear, and then press +/
on the
remote (or /
on the unit)
repeatedly to
tune in the desired station.
To reduce static noise on a weak FM stereo
station
Press FM MODE
on the remote repeatedly until
“MONO” appears to turn off stereo reception.
Notes on listening to DAB stations
When tuning in a DAB station, it may take a few seconds before you
hear any sound.
Primary service is automatically received when secondary service
ends.
Playing a tape
1
Select the tape function.
Press TAPE
on the remote.
2
Insert a tape.
Press TAPE
(eject)
on the unit, and load a TYPE
I (normal) tape into the cassette holder with the side
you want to play facing forward. Make sure there is
no slack in the tape to avoid damaging the tape or the
tape deck.
3
Press DIRECTION
on the unit repeatedly to select
“
” to play one side. Select “
” or “
” to play
both sides.
4
Start playback.
Press
(play)
on the remote (or TAPE
(play)
on the unit). Press the button again to play
the reverse side.
To
Press
Pause playback
(pause)
on the remote (or
TAPE
(pause)
on the unit).
To resume play, press the button
again.
Stop playback
(stop)
on the remote (or
TAPE
(stop)
on the unit).
Rewind or fast
forward
/
(rewind/fast forward)
.
Tip
If you select “
” the tape deck stops automatically after repeating
the sequence five times.
Changing the display
To change
Press
Information on
the display*
DISPLAY
repeatedly when the
system is on.
Display mode
(See below.)
DISPLAY
repeatedly when the
system is off.
* For example, you can view:
CD/MP3 disc information such as the track or file number, group
name (during normal play), or the total play time (while the player
is stopped)
DAB station information such as the service name, channel label,
preset number, frequency, DLS (Dynamic Label Segment), or
ensemble label
The system offers the following display modes.
Display mode
When the system is off,
1)
Clock
The clock is displayed.
Power Saving
Mode
2)
The display is turned off to conserve
power. The timer and clock continue
to operate.
1)
The STANDBY indicator lights up when the system is off.
2)
When the system is in Power Saving Mode, the following functions
are unavailable:
setting the clock.
changing the CD power manage function.
Notes on the display information
The following are not displayed;
total playing time for a CD-DA disc depending on the play mode.
total playing time for an MP3 disc.
remaining playing time for an MP3 file.
The following are not displayed correctly;
elapsed playing time of an MP3 file encoded using a VBR (variable
bit rate).
group and file names that do not follow either the ISO9660 Level
1, Level 2 or Joliet in the expansion format.
The following are displayed;
ID3 tag information for MP3 files when ID3 version 1 and version
2 tags are used.
up to 124 characters of ID3 tag information using uppercase
letters (A to Z), lower-case letters (a to z), numbers (0 to 9), and
symbols (! " # $ % & ’ ( )
*
+ ,
. / : ; < = > ? @ [ \ ] ^ _ ` { | } ~).
up to 16 characters of service name, up to 128 characters of DLS
(Dynamic Label Segment) and up to 16 characters of ensemble
label using uppercase letters (A to Z), lower-case letters (a to z),
numbers (0 to 9), and symbols (! " # $ % & ’ ( )
*
+ ,
. / : ; < = > ?
@ [ \ ] ^ _ ` { | } ~).
Using optional audio components
To connect an optional headphones
Connect headphones to the PHONES jack
on the
unit.
To connect an optional analog component
Connect additional analog component to the ANALOG
IN jack
on the unit using an audio analog cord (not
supplied). Turn down the volume on the system, and
then press FUNCTION
repeatedly to select “MD”.
To connect an optional digital component
Connect a component with a digital optical input jack
to the CD DIGITAL OUT jack
on the unit using
a digital optical cord (square, not supplied). You can
digitally record from a CD-DA disc onto the connected
component.
Note
You cannot make a digital recording of copy guarded discs and MP3
tracks using a digital component connected to this system.
When carrying this system
Use buttons on the unit to perform the following
procedure.
1
Press
(power)
to turn on the system, then
press FUNCTION
repeatedly to switch the
function to CD.
2
Make sure that no disc is loaded in the disc slot to
protect the CD mechanism.
3
Hold down
(stop)/CANCEL
and then press
DSGX
and
+
until “LOCK” appears.
4
Unplug the power cord.
FM/DAB lead antenna
(Extend it horizontally.)
75-ohm coaxial cable with F male type connector (not supplied)
or
AM loop antenna
Connect white side
Speakers
Attach the supplied speaker pads to the bottom of the
speakers to prevent slipping.
To DAB external antenna
(not supplied)
or
or