manualshive.com logo in svg

Lanzar STVD7IN, Руководство пользователя, Страница: 25 / 42

Поделиться
Скачать
Lanzar STVD7IN Скачать руководство пользователя страница 25

23

BASIC OPERATION

*  When no key is pressed for 5 seconds, 

the menu will disappear.

RDS (Radio Data System)

1. Press MENU key until the monitor   

displays following picture.

2. Use 

▲ ▼

Key and place cursor (Yellow   

Bar) on RDS and press ENTER key.

3. Use 

▲ ▼

Key and place cursor (Yellow)   

on On and press ENTER key as picture 
below.

*  When no key is pressed for 5 seconds, 

the menu will disappear. Press ENTER   

key at least for 2 seconds on current  

screen to return to the previous screen.  

Press Menu key about 1 seocnd to turn 

MENU off directly.

4. Press PS/BSM button to receive RDS 

stations as picture below.

AUTO TILT SYSTEM

1. Press MENU key until the monitor

displays following picture.

2. Use 

▲ ▼

Key and place cursor (Yellow 

Bar) on Auto Tilt System and press  
ENTER key.

3. Use 

▲ ▼

key to set Auto Tilt System 

as On or Off as picture below.

*   When no key is pressed for 5 seconds, 

the menu will disappear.

Содержание STVD7IN











































Отзывы:

Нет отзывов