background image

12

LEDS

CONTACT

For questions and technical support, please check our online knowledge base 
at www.lantronix.com/support

Lantronix
15353 Barranca Parkway, Irvine, CA 92618, USA
Phone:(949) 453-3990 or Fax: (949) 453-3995

www.lantronix.com

W W W . L A N T R O N I X . C O M

13

Q u i c k   S t a r t   G u i d e

XPress-DR+

DEVICEINSTALLER CONTINUED

Step 3: Add the Unit to the Device List

Now add the unit to the list of similar Lantronix devices on the network so that
you can manage and configure it. To perform this step, click the Search icon         .
DeviceInstaller locates the unit and adds it to the list.

Step 4: Complete the Configuration

Once the unit is in the device list, you can complete the configuration.

• 

To use a web interface (Web Manager), double-click the unit in the list and 
click the Web Configuration tab.

• 

To use Setup Mode (a command line interface), double-click the unit in the 
list and click the Telnet Configuration tab.

Note:

Please see the XPress-DR+ User Guide for detailed instructions 

on configuration.

Upgrade the Firmware

To upgrade firmware or install other protocols such as ModBus refer to the 
XPress-DR+ Users Guide or the DeviceInstaller online help.

Содержание XPress-DR Plus









Отзывы: