6
W W W . L A N T R O N I X . C O M
Q u i c k S t a r t G u i d e
XPress-DR+
7
QUICK CONNECT CONTINUED
Typical Installation
QUICK CONNECT
Warning:
Connecting a device to an active Ethernet network can disrupt
communications on the network. Make sure the device is configured for your
application before connecting it to an active network.
1. Connect a serial device to your XPress-DR+.
2. Connect an Ethernet cable to the Ethernet port.
3. Supply power to your XPress-DR+ using a 9-30 VDC or 9-24 VAC (2.3 W
maximum) source.
4. Supply power to the serial device.
5. Verify that the green Link LED is lit.
