Lantronix xDirect Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 82

background image

4: Using DeviceInstaller

xDirect User Guide

20

Comments

Configurable field. Information about the xDirect. Double-click the field,
type in the value, and press

Enter

to complete. This description or

comment is not visible on other PCs or laptops using DeviceInstaller.

Device Family

Non-configurable field. Displays the xDirect’s device family as xDirect.

Type

Non-configurable field. Displays the device type as XDT232 or XDT485.

ID

Non-configurable field. Displays the xDirect’s ID embedded within the unit.

Hardware Address

Non-configurable field. Displays the xDirect’s hardware (or MAC)
address.

Firmware Version

Non-configurable field. Displays the firmware currently installed on the
xDirect.

Extended Firmware Version

Non-configurable field. Displays the full version nomenclature of the
firmware.

Online Status

Non-configurable field. Displays the xDirect’s status as online, offline,
unreachable (the xDirect is on a different subnet), or busy (the xDirect is
currently performing a task).

IP Address

Non-configurable field. Displays the xDirect’s current IP address. To
change the IP address, see

Assigning an IP Address

.

IP Address was Obtained

Non-configurable field. Displays “Dynamically” if the xDirect automatically
received an IP address (e.g., from DHCP). Displays “Statistically” if the
IP address was configured manually. If the IP address was assigned
dynamically, the following fields appear:



Obtain with DHCP with value of True or False



Obtain with BOOTP with value of True or False



Obtain with RARP with value of True or False



Obtain with Auto IP with value of True or False

Subnet Mask

Non-configurable field. Displays the xDirect’s current subnet mask. To
change the subnet mask, see

Assigning an IP Address

.

Gateway

Non-configurable field. Displays the xDirect’s current gateway. To change
the gateway, see

Assigning an IP Address

.

Number of COB partitions
supported

Non-configurable field. Displays the number of COB partitions supported.

Number of Ports

Non-configurable field. Displays the number of ports on the xDirect.

TCP Keepalive

Non-configurable field. Displays the xDirect’s TCP keepalive value. The
value is in the range

1-65s

, and the default setting is

45

.

Telnet Supported

Non-configurable field. Indicates if Telnet sessions are permitted.
Displays True.

Telnet Port

Non-configurable field. Displays the xDirect’s port for telnet sessions.

Web Port

Non-configurable field. Displays the xDirect’s port for Web Manager
configuration.

Maximum Baud Rate
Supported

Non-configurable field. Displays the xDirect’s maximum baud rate.

Note:

The

xDirect

may not currently be running at this rate.

Firmware Upgradable

Non-configurable field. Displays

True

, indicating the xDirect’s firmware is

upgradable as newer version become available.

Supports Configurable Pins

Non-configurable field. Displays

False

.

Supports Email Triggers

Non-configurable field. Displays

False

.

Supports AES Data Stream

Non-configurable field. Displays

True.

xDirect supports AES encryption

Current Settings (continued)

Description

«
...
18
19
20
21
22
...
»

Содержание xDirect



















































































Отзывы:

Нет отзывов

Похожие инструкции для xDirect

Redbooks ServeRAID-MR10k

Бренд: IBM Страницы: 48

Бренд: 3onedata Страницы: 4

Бренд: IESC Страницы: 109

Бренд: AXIOMTEK Страницы: 55

xPico XPW100A003-01-B

Бренд: Lantronix Страницы: 54

Бренд: BlueBroadcaster Страницы: 21

ReadyNAS 3220 Series

Бренд: NETGEAR Страницы: 4

SuperServer 6123L-8R

Бренд: Supero Страницы: 105

SC450NX - Server Platform - 0 MB RAM

Бренд: Intel Страницы: 200

Alcatel-Lucent OXO Connect Compact

Бренд: Nokia Страницы: 216

Бренд: NewTek Страницы: 206

T19 Hydro Server

Бренд: BITMAIN Страницы: 17

Бренд: TRENDnet Страницы: 2

Бренд: TRENDnet Страницы: 2

TEW-P1UG - Wireless Print Server

Бренд: TRENDnet Страницы: 2

Бренд: TRENDnet Страницы: 15

Бренд: Black Box Страницы: 3

Бренд: BushkaBlue Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды