Lantronix
SM4T4DPA Install Guide
33867 Rev. A
Page
13
of
29
Equipment Checklist
After unpacking this switch, please check the contents to be sure you have received all the components. Then,
before beginning the installation, be sure you have all other necessary installation equipment.
Package Contents
□
SM4T4DPA Management Switch
□
Four adhesive rubber feet
□
Mounting Accessory (for 19” Rack Shelf, Optional)
□
This Installation Guide
□
One AC Power Cord
□
One RS-232 to RJ-45 Console Cable
Note
: Notify your sales representative immediately if any of the aforementioned items is missing or damaged.
Warning
: The mini-GBICs are Class 1 laser devices. Avoid direct eye exposure to the beam coming from the
transmit port.
Mounting
The switch can be mounted in a standard 19-inch equipment rack or on a desktop or shelf. Mounting instructions
for each type of site as follows.
Rack Mounting
Before rack mounting the switch, please pay attention to the following factors:
□
Temperature: Since the temperature within a rack assembly may be higher than the ambient room
temperature, check that the rack-environment temperature is within the specified operating temperature
range (0 to 40 °C).
□
Mechanical Loading: Do not place any equipment on top of a rack-mounted unit.
□
Circuit Overloading: Be sure that the supply circuit to the rack assembly is not overloaded.
□
Grounding: Rack-mounted equipment should be properly grounded.
To Rack-mount Devices
:
Step 1. Attach the brackets to the device using the screws provided in the Mounting Accessory.
Attaching the Brackets
Step 2. Mount the device in the rack (Via Optional Rack-Mount kit), using four rack-mounting screws (not provided).
Be sure to secure the lower rack-mounting screws first to prevent the brackets being bent by the weight of the
switch.