Lantronix SM12XPA, Инструкция по установке, Страница: 21 / 40

Lantronix
SM12XPA Install Guide
33847 Rev. B https://www.lantronix.com/ 21
Removing SFP+/SFP28 Modules
1. Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface.
2. Disconnect the cable from the SFP+ module. For reattachment, note which cable connector plug is send (TX)
and which is receive (RX).
3. Insert a dust plug into the optical ports of the SFP+/SFP28 module to keep the optical interfaces clean.
4. If the module has a bale-clasp latch, pull the bale out and down to eject the module. If the latch is obstructed
and you cannot use your finger, use a small, flat blade screwdriver or other long, narrow instrument to open
the latch.
5. Grasp the SFP+/SFP28 module and carefully remove it from the module slot.
6. Place the module in an antistatic bag or other protective environment.
Power Supply Information
The SM12XPA ships with one AC power supply (100V-240V AC Input) in the
box with the switch but not installed. An optional second power supply may be
ordered separately. Total 250W Max.
Warning
: Insert the power supply with the label up (edge connectors down).
Otherwise, the power supply can be easily damaged.
Warning : Connect only to a properly earth grounded outlet.