Lantronix SLB088411-01 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 280

Lantronix SLB088411-01 Скачать руководство пользователя страница 2

SLB™ Branch Office Manager User Guide

2

Copyright & Trademark

© 2013 Lantronix, Inc. All rights reserved. No part of the contents of this book may be
transmitted or reproduced in any form or by any means without the written permission of
Lantronix.

Lantronix

is a registered trademark of Lantronix, Inc. in the United States and other

countries.

SLB

,

SLC

,

SLM

,

SLP

,

Detector

and

Spider

are trademarks of Lantronix, Inc.

Windows

and

Internet Explorer

are registered trademarks of Microsoft Corporation.

Mozilla

and

Firefox

are registered trademarks of the Mozilla Foundation.

Chrome

is a

trademark of Google, Inc.

Opera

is a trademark of Opera Software ASA Corporation

Norway.

Safari

is a registered trademark of Apple, Inc. All other trademarks and trade

names are the property of their respective holders.

Open Source Software

Some applications are Open Source software licensed under the Berkeley Software
Distribution (BSD) license or the GNU General Public License (GPL) as published by the
Free Software Foundation (FSF). Redistribution or incorporation of BSD or GPL licensed
software into hosts other than this product must be done under their terms. A machine
readable copy of the corresponding portions of GPL licensed source code is available at
the cost of distribution.

Such Open Source Software is distributed WITHOUT ANY WARRANTY, INCLUDING
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. See the GPL and BSD for details.

A copy of the licenses is available from Lantronix. The GNU General Public License is
available at

http://www.gnu.org/licenses/

Contacts

Lantronix, Inc.
Corporate Headquarters

167 Technology Drive
Irvine, CA 92618, USA

Toll Free: 800-526-8766
Phone:

949-453-3990

Fax:

949-453-3995

Technical Support

Online:

www.lantronix.com/support/

Sales Offices

For a current list of our domestic and international sales offices, go to the Lantronix web
site at

www.lantronix.com/about/contact

«
1
2
3
4
...
»

Содержание SLB088411-01

























































































































































































































































































Отзывы:

Нет отзывов