Lantronix SISPM1040-3 L Series Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 48

Lantronix SISPM1040-3 L Series Скачать руководство пользователя страница 45

Lantronix

SISPM1040-3xxx-L Install Guide

33762 Rev. G

https://www.lantronix.com/

Page

45

of

48

Chapter 5 - Regulatory and Safety Information

Compliance and Safety Statements

FCC, Class A: This product has been tested and found to comply with the limits for a Class A digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This product generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction
manual, may cause harmful interference with radio communications. Operation of this product in a residential area
is likely to cause harmful interference, in which case you will be required to correct the interference at your own
expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause undesired operation.
CE MARK DECLARATION OF CONFORMANCE FOR EMI AND SAFETY (EEC): This equipment has been tested and
found to comply with the protection requirements of European Emission Standard EN55022/EN61000-3 and the
Generic European Immunity Standard EN55024.

Declaration of Conformity

«
...
43
44
45
46
47
...
»

Содержание SISPM1040-3 L Series

















































Отзывы:

Нет отзывов