5: Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference
117
hostname
<text>
Sets the host name. <text> = name of the host to ping.
interval
<seconds>
Sets the Ping interval in seconds.
method icmp
Ping using ICMP-ECHO.
method tcp
Ping using TCP.
no hostname
Clears the host name.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
show status
Show failover status
state disable
Disables Failover.
state enable
Enables Failover.
test
Test failover configuration
timeout
<seconds>
Sets the Ping response timeout in seconds.
write
Stores the current configuration in permanent memory.
filesystem (filesystem) level commands
cat
<file>
Show the contents of a file
cd
<directory>
Change the current directory to the specified directory
clrscrn
Clears the screen.
cp
<source file>
<desti-
nation file>
Copy an existing file
dump
<file>
Show contents of a file as a hex dump
exit
Exits to the enable level.
format
Format the file system and lose all data
ls
Show all files and directories in the current directory
ls
<directory>
Show all files and directories in the specified directory
mass storage
Enters the next lower level.
mkdir
<directory>
Create a directory
mv
<source file>
<desti-
nation file>
Move a file on the file system
pwd
Print working directory
rm
<file>
Remove a file
rmdir
<directory>
Remove a directory
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
show statistics
Show file system statistics
show tree
Show all files and directories from current directory
tftp get
<source file>
<destination file>
<host>
Get a file using TFTP
tftp get
<source file>
<destination file>
<host>
<port>
Get a file using TFTP
tftp put
<source file>
<destination file>
<host>
Put a file using TFTP
tftp put
<source file>
<destination file>
<host>
<port>
Put a file using TFTP
touch
<file>
Create a file
filter 1 (config-ethernet-qos-filter:usb0:1) level commands