Using the Lantronix SGX 5150 Serial Device Server
26
In the following examples the difference between the initial and updated wiring is shown for an MCLOG and a
MLDAQ.
Hint - These example uses a CH200 as the charge controller, however, this could also be a SunSaver.
MCLOG
The first figure depicts the wire configuration when the MCLOG is shipped, with both the SGX 5150 and the
datalogger connecting to the charge controller.
(Figure 38)
In the next figure, the wires previously connecting the SGX 5150 to the charge controller have been
disconnected from the CH200 and reconnected directly to the SW12 port of the CR300, sending power to the
SGX 5150 through SW12.
(Figure 39)
