Lantronix Series 1000, Руководство пользователя, Страница: 8 / 49

5
Switch Card Screws (Inside Top Ejectors)
When adding a card, first remove the blank panel covering the card slot by
loosening the screws located at the top and bottom of the panel. Insert the card
into the empty slot being sure to slide the card into the guides on the top and
bottom of the chassis. Push the card all the way in until the black plastic tabs
engage the edge rails on the top and bottom. Push the plastic ejector tabs
together vertically so the card is levered in to the slot and is firmly seated. If
resistance is encountered, removing an adjacent card and inserting both
simultaneously will often reduce the force required.
All cards for the Series 1000 have metal key tabs protruding along their inside
edge near the backplane connectors. These tabs prevent the insertion of
keyboard/mouse, serial, or control cards into slots designated for video or switch
cards. Video and switch cards require higher voltage than the other cards, so
accidental insertion of another card type into a video or switch slot would damage
that card.