Lantronix Series 1000, Руководство пользователя, Страница: 31 / 49

28
while the level two password is
mh2
. These passwords should be deleted as
soon as possible to prevent unauthorized access to the Matrix-Hub.
PH
List password commands
PL
List number of defined passwords
PD
Delete a password
PN
Create a password
The
PH
command lists the commands that are used only with passwords.
The
PL
command lists the number of passwords defined on the Matrix-Hub. It
does not list the actual password. Only the total number of defined passwords is
displayed, and no distinction is made between the two levels. The passwords
must be recorded separately from the Matrix-Hub, as there is no way to display
the passwords on the Matrix-Hub.
The
PD
command deletes a password from the Matrix-Hub. When using this
command, the Matrix-Hub will prompt the user for the password to delete, and
then to confirm that password by retyping it. The password will then be
permanently deleted and is not recoverable. The name of the password must be
known to delete it. The password currently in use may not be deleted.
The
PN
command creates a new password. The level of the password (level one
or level two) must be specified at the command line; numerals must be used (i.e.,
type
1
or
2
, not
one
or
two
). After the command is entered, the user is
prompted to enter the new password, and then confirm it. The password is case-
sensitive, so care must be exercised when recording it. Only ten passwords of
either level may be created on each Matrix-Hub.