Lantronix SecureLinx SLK Series, Руководство пользователя

Страница: 103 / 160

Using the OSD Interface to Configure the SLK
SecureLinx SLK Remote KVM User Guide 5-7
PPP Options (SLC16 only)
Select the lines you need to change in PPP Options and press Enter to change as
required.
Figure 5-5. PPP Options
9 Restart PPP server . Reset the server function in the SLK.
10 Local IP address . Address of the SLK for dial-up.
11 Remote IP address . Address of the client (remote) PC.
12 Van Jacobson Header Compression . Enable if your traffic is mostly small
packets that can benefit from reduced header size; otherwise, ignore.
13 Protocol field compression . Enable to reduce overhead.
14 Address field compression . Enabled by default. Sends compression warning.
15 Authentication. Login authentication . Select the level you want to support.
16 Peer’s name . Enter the peer’s user name.
17 Secret . Dialup account password paired with peer’s name.
18 Modem Init String . Initialization string specific to the modem attached to the
SLK serial port. For more information, see “Configuring PPP Settings” on
page 4-21 .
19 ACCM . Asynchronous Control Character Maps. Provides a way to negotiate the
use of asynchronous control characters. For more information, see “Configuring
PPP Settings” on page 4-21 .