Lantronix PremierWave Enterprise Wi-Fi 2050 Скачать руководство пользователя страница 9

Страница: 9 / 20

2: Evaluation Kit

PremierWave® 2050 Enterprise Wi-Fi® IoT Module Evaluation Kit User Guide

Ref Des.

Connector/Header Function

Serial Port 2
Standard DB9 port for connection to RS232, RS485, and RS422 networks

Dual Type A USB Host Port
Port A of jack is a USB2.0 full speed port
Port B of jack is a USB2.0 high speed port

Mini USB Connector
Standard USB device port that can be used to power the evaluation board and/or drive the

PremierWave 2050 module USB 2.0 High Speed device port.

J10

Mini USB Connector
Standard USB device port that can be used to power the evaluation board and/or drive the

evaluation board USB-to-serial converter. The USB serial port converter is connected to the

module serial debug port

J11

Ethernet Jack
RJ45 jack for connection to the module Ethernet port

JP1

Module Power Jumper
Allows for power measurement of the PremierWave 2050 module. Remove L1 and install

current sensor in line with JP1 for module current measurements

JP2

Configurable Pin Header
Header with 3.3V power, ground, C1, CP2, CP3, CP4, CP7, CP8. Useful for connecting to

SPI devices.

JP3

Not installed - reserved for future use

JP4

HW Reset Button Jumper
Allows access to module HW reset signal and SW1 push button. Install to use SW1 as HW

reset button.

JP5

Default Button Jumper
Allows access to module reset to default signal and SW2 push button. Install to use SW2 as

reset to default button.

JP6

WAKE Header
Allows access to module WAKE signal and SW3 push button. Install to use SW3 to wake up

the PremierWave 2050 module when in low power modes.

JP7

SDIO Card WP Header
Reserved for future use with SDIO compatible modules

JP8

SDIO Card Detect Header
Reserved for future use with SDIO compatible modules

JP9

Serial Port 1 Breakout Header
Install jumpers to connect PremierWave 2050 Serial Port 1 flow control signals to the

RS232/RS422/RS485 transceiver for Serial Port 1.

JP10

Serial Port 1 RS232/RS422/RS485 Mode Jumper
Leave open for RS232 mode. Install for RS422/RS485

JP11

Serial Port 1 RS422/RS485 Mode Jumper
Leave open for RS232 or 4-wire mode. Install for 2-wire mode.

JP12

Serial Port 2 Breakout Header
Install jumpers to connect PremierWave 2050 Serial Port 2 flow control signals to the

RS232/RS422/RS485 transceiver for Serial Port 2.

Содержание PremierWave Enterprise Wi-Fi 2050





















Результаты поиска

Содержание PremierWave Enterprise Wi-Fi 2050

Отзывы:

Бренды по названию

Популярные бренды

Lantronix PremierWave Enterprise Wi-Fi 2050, Руководство пользователя

Результаты поиска

Содержание PremierWave Enterprise Wi-Fi 2050

Отзывы:

Бренды по названию

Популярные бренды