Lantronix PremierWave Enterprise Wi-Fi 2050 Скачать руководство пользователя страница 14

Страница: 14 / 20

2: Evaluation Kit

PremierWave® 2050 Enterprise Wi-Fi® IoT Module Evaluation Kit User Guide

LEDs

The PremierWave 2050 evaluation board includes several LEDs for signal and unit status. The

table below lists all of the LEDs and their functions.

Table 2-10 LEDs Signals

Module

Pin

LED Ref

Design

Color LED Function

LED 1

Orange

PremierWave 2050 Status



Power is ON/No Error –

LED displays a continuous solid light



No Ethernet Link

LED flashes long, long, short, short (repeat)



No IP obtained from Ethernet Network -

LED flashes long, long, short,

short, short (repeat) in amber



No WLAN Link-

LED flashes long, long, long, short, short (repeat)



No IP obtained from WLAN Network -

LED flashes long, long, long,

short, short, short (repeat)

LED 2

Orange

WLAN Status



Device Associated with Access Point

(on STA interface)

LED is ON



Device NOT Associated with Access Point

- LED is OFF



WPS Triggered –

LED flashes a fast blinking pattern



WPS Profile Error -

LED flashes long, long, long, short, short, 2 seconds

off (continuous pattern)



WPS Timeout Error -

LED flashes long, long, long, short, short, short,

short, 2 seconds off (continuous pattern)

J11 pin 17 Yellow



Ethernet Speed 100 Mbps Mode -

LED is ON

J11 pin 19 Green



Ethernet Link/Activity -

LED is ON when there is an Ethernet link and

blinks when there is Ethernet activity

Additional Headers

The table below lists the pin functionality of the additional evaluation board headers.

Table 2-11 Additional Headers

Module Pin Header Pin Signal

Function

JP5 pin 2

Module reset to defaults

(active low)

Install jumper (JP3 pins 1 to 2) to use SW2

for asserting default function.

JP4 pin 2

Module hardware reset

(active low)

Install jumper (JP4 pins 1 to 2) to use SW1

for asserting hardware reset.

JP6 pin 2

Module wake up (rising edge

triggered)

Install jumper (JP16 pins 1 to 2) to use SW3

for asserting module wake up.

JP2 pin 1

Board 3.3V power

Test point

JP2 pin 2

CP2, configurable pin

External SPI Interrupt

JP2 pin 3

CP3, configurable pin

External SPI MISO

JP2 pin 4

CP8, configurable pin

External SPI CS

Содержание PremierWave Enterprise Wi-Fi 2050





















Результаты поиска

Содержание PremierWave Enterprise Wi-Fi 2050

Отзывы:

Бренды по названию

Популярные бренды

Lantronix PremierWave Enterprise Wi-Fi 2050, Руководство пользователя

Результаты поиска

Содержание PremierWave Enterprise Wi-Fi 2050

Отзывы:

Бренды по названию

Популярные бренды