Lantronix Open-Q 660 mSOM, Руководство пользователя

Страница: 26 / 43

3: Open-Q 660 µSOM Development Kit
Open-Q™ 660 µSOM Dev Kit User Guide 26
The UART connection used on the Open-Q 660 is a USB micro B connector (J1600). This debug UART is
available over USB via the FTDI FT232RQ chip on the carrier board. To get the serial terminal working with a
PC, user needs to ensure that the appropriate FTDI drivers are installed. Use latest FTDI drivers from
https://www.ftdichip.com/FTDrivers.htm instead of system update.
3.7.9 USB Type C (for ADB) J2300 (11)
Figure 12. USB Type C (for ADB) J2300
The USB connection on the Open-Q 660 is a USB Type C connector (J2300). This connection is used for
Android debug bridge (ADB) functionality. To get the adb shell, ensure that the board is up and running and
connect the Type C cable between the board and the PC. Type the command adb root and adb shell on the
PC prompt to exercise the adb shell functionality. While ADB utilizes only the high speed channel, this USB
type C connector supports the USB 3.0 specification including the super speed data channel.
3.7.10 USB 2.0 Type A Connector J2400 (6)
The Open-Q 660 carrier board contains one USB Type A connector J2400 situated on the north side of carrier
board, which exposes USB 2.0 host functionality. The standard USB 2.0 connector provides 500mA VBUS
current capability for external devices.
Figure 13. USB 2.0 Type A Connector J2400 (6)