Lantronix MSS100 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 71

Lantronix MSS100 Скачать руководство пользователя страница 36

5-1

5: Using the MSS

This chapter explains how to use the MSS once it is running. Users can make host-initiated
(incoming) connections and use the host applications and code examples included on the
MSS distribution CD-ROM. Users can also use the MSS interactively to make outgoing
connections, manipulate sessions, and view server and network information with the help
of Show commands.

In addition, this chapter explains:

◆

Setting up two MSS units to emulate a direct serial connection over the LAN (see
Serial Tunnel on page 5-7).

◆

Using the MSS as a data pipe between a serial device and multiple hosts on the
network (see Multihost Mode on page 5-8).

◆

Making the MSS look like a modem so that it can be used with existing
communications software (see Modem Emulation Mode on page 5-9).

◆

Using the Lantronix COM Port Redirector software to redirect PC COM ports (see
COM Port Redirector on page 5-11).

5.1 Incoming Connections

5.1.1 Socket Connections

Each node on a network has a node address, and each node address can allow connections
on one or more sockets. Sometimes these sockets are referred to as ports. TCP/IP and IPX
connections can be made directly to the MSS serial port using sockets.

There are two categories of sockets. Well-known sockets are those that have been defined
in RFCs (Requests for Comments); for example, port 23 is used for Telnet connections.
There are also custom sockets that users and developers define for their own specific needs.

«
...
34
35
36
37
38
...
»

Содержание MSS100








































































Отзывы:

Нет отзывов