Command Reference
Change Flow Control
2-23
PortList
Specify a particular port or group of ports. Port numbers are specified with
integers between 1 and 4, and should be separated with commas (for lists) or
dashes (for ranges).
Defaults
Disabled
2.18 Change Flow Control
Sets the type of flow control to be used on the specified port.
Restrictions
Requires privileged user status.
Does not apply to the MSS485.
Errors
CTSRTS Flow Control is not available in RS-485 mode.
Parameters
Port
MSS4 only. Specifies a particular port or group of ports.
Note:
In the absence of the PortList parameter, the configuration will affect the MSS4’s
current port only.
PortList
Specify a particular port or group of ports. Port numbers are specified with
integers between 1 and 4, and should be separated with commas (for lists) or
dashes (for ranges).
CTSRTS
Uses RTS/CTS, or hardware, flow control.
None
Flow control is not used.
XONXOFF
Uses XONXOFF, or software, flow control.
Defaults
XONXOFF
CHANGE PORT PortList FLOW CONTROL
CTSRTS
NONE
XONXOFF
Содержание MSS
Страница 1: ...MSS Reference Manual For the Lantronix MSS Family of Device Servers ...
Страница 10: ......
Страница 80: ......
Страница 82: ......