Lantronix MPS100, Руководство пользователя

Страница: 69 / 78

MPS/LPS User Guide F: Frequently Used Commands
F-5
Command Option(s) Description
POSTSCRIPT
{EN/DIS} When enabled, causes the
MPS to assume the attached
device is a PostScript device
and act accordingly.
PSCONVERT
{EN/DIS} When enabled, causes the
MPS to place a PostScript
wrapper around each text
job.
SOJ string Causes the MPS to send a
start-of-job string to the
attached device before every
job. Enter a start string or
the word
none
.
TCPPORT
string Specifies a raw TCP listener
socket for the service. Enter
a socket number (4000 to
4999) or the word
none
.
DEFINE SERVICE
“name”
option
TELNETPORT
string Specifies a TCP listener
socket for the service. Unlike
TCPport
, this option
performs Telnet IAC
interpretation on the data
stream. Enter a socket
number (4000 to 4999) or
the word
none
.
DELAY num Schedules a reboot after
num
minutes. Enter a value
from 0 to 120.
CANCEL
Cancels an impending
initialization.
FACTORY Reboots the MPS to its
factory default settings.
INITIALIZE option
NOBOOT Forces the MPS to stop in
Boot Configuration Mode
rather than fully rebooting.