Lantronix Maestro E220 Series, Быстрый старт

Страница: 15 / 25

Connecting Lantronix Router
E220 Series Quick Start Guide 15
4.1.5. Connect the router LAN port with the computer LAN port.
Figure 8:
Connecting the router and computer LAN port
4.1.6. Connect the AC power to the DC in connector, then connect the Micro-Fit connector to
the power input, located on the LAN-side panel of the Lantronix Router.
Plug the AC cord into a standard AC receptacle as shown below.
The power LED will light when power is applied.
Figure 9:
Connecting the AC power connector
4.1.7. An alternate option is to power the Lantronix Router over Ethernet port as the WAN
port supports PoE (Power over Ethernet).
NOTE: Please refer to the section Power over Ethernet on Appendix 23 for
connections example.