Lantronix LSB4, Руководство по установке

Страница: 43 / 91

LSB4 Installation Guide Set-up and Operation
3-15
Introduction
Set-up and
Operation
Customizing Serial Console Port Settings
The default characteristics of the serial console port are listed in
Figure 3-19.
Figure 3-19: Serial Port Default Characteristics
These settings can be changed using the Set Port and Define Port com-
mands. Some examples of Set/Define Port commands are shown below
[Figure 3-20]:
Figure 3-20: Set/Define Port Examples
To make Set Port commands permanent, use the Save Port or the Define
Port command.
For information about the Save command, refer to the LSB4 Reference
Manual.
Local> LIST PORT
Port 1: Username: Physical Port 1 (Idle)
Char Size/Stop Bits: 8/1
Input Speed: 9600
Flow Ctrl: Xon/Xoff
Output Speed: 9600
Parity: None
Modem Control: None
Terminal Type: Soft
Characteristics:
Local> SET PORT SPEED 38400
Local> SET PORT FLOW XON
Local> SET PORT COMMAND ENABLED
NOTE