Lantronix LS Series, Руководство пользователя, Страница: 6 / 26

Lantronix LSS2200-8P MobileApp User Guide
33870 Rev. A https://www.lantronix.com/ 6
9. From the home page there are two options:
INITIALIZE is used with NFC to pre-configure the switch prior to installation.
TROUBLESHOOT
is used with BLE to access the switch to check or change configuration or reboot the
switch after installation without having to physically access the switch with a cable.
The options are described in the sections below.
The ideal use case is for the switch to be pre-configured through NFC (the Mobile App) prior to installation or
bootup. The switch is then installed in an out-of-reach location (i.e., high on a pole/wall). The switch is powered up
and the configuration is set in the switch. At this point, the NFC is no longer used for configuration changes (i.e.,
no one should have to climb the pole to get close enough to make changes - and no unauthorized person should
be able to make changes either) All future changes can be made remotely through the GUI or at the site (from the
ground) through BLE using the Mobile App.