manualshive.com logo in svg

Lantronix EPS4-100, Руководство по установке

Поделиться
Скачать
Lantronix EPS4-100 Скачать руководство пользователя страница 77

Updating Software

K - 1

K - Updating Software

Current software files are available on the distribution CD. Software updates and release notes for 
the Server can be downloaded directly from the Lantronix development systems in one of three 
ways: via the Lantronix World Wide Web site located at
http://www.lantronix.com, using anonymous FTP through the Internet, and via dial-up modem. 

K.1 Updating Via the Web

The latest version of EPS.SYS can be downloaded from the Lantronix Web site. The following 
instructions will lead you through the web site to the software file.

1.

On the home page, http://www.lantronix.com, click on 

Free Software Updates

.

2.

From the directory that appears, choose 

pub/

.

3.

From the resulting directory, choose the server acronym.

4.

From the resulting directory, choose the software volume.

5.

From the final directory, choose EPS.SYS.

NOTE:

As a result of Netscape Navigator’s configuration, clicking on the software 
name will not allow you to download the file. You must save the file as a 
source document to your host.

Содержание EPS4-100



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды