Lantronix Device Server UDS 10, Руководство по оборудованию

Страница: 7 / 8

Step 11 - If we are going to connect the UDS-10 using RS-232, the only change
we need to make to this configuration is “ Port No ”. It needs to be changed to
“ 3001 ”.
If we are going to connect the UDS-10 using RS-422 we also need to change the
“
IF Mode ” to “ 4D ”.
Press the “ Enter ” key until we reach the main menu screen again.
Step 12 - Press “9” and “Enter”
Programming is complete!