Lantronix Device Server UDS 10, Руководство по оборудованию

Страница: 5 / 8

Step 5 - Press “ 0 ” to enter the server configuration.
Step 6 - Enter your IP Address
Step 7 - If your network requires you to pass thru a router to access the UDS-10
then Press “ Y ” to Set Gateway IP Address. Otherwise, hit “Enter”.
Step 8 - If you entered “ Y ” in the previous step then enter the Gateway IP Address.
Step 9 - Enter the Netmask. The following settings are for “ Classfull ” Addresses
only. If the company is using “ Classless ” Addresses then the company will have to
provide you with the amount of bits reserved for “Host”.
If Class A IP Address enter 24
If Class B IP Address enter 16
If Class C IP Address enter 08