Configuration
4-9
the TCP connection. This is especially useful to minimize the response time for
specific protocol characters on the serial line (i.e. ETX, EOT etc.). Setting the
first Sendchar to “00” disabled the recognition of the characters.
Alternatively, the two characters can be interpreted as a sequence (see Pack
control, above).
4.7.14
Telnet Terminal Type
This parameter appears only if terminal type option is enabled by setting Bit 6
in the disconnect mode. If set, the terminal name used for the Telnet terminal
type exchange option can be set here. Only one name can be entered.
If Terminal type option is enabled, UTS also reacts to the EOR (end of record)
and binary options, which can be used for applications like terminal emulation
to IBM hosts (contact Lantronix for details).
4.7.15
Exit Configuration Mode
To leave the configuration program and save all changes, press ‘9’. All values
will be stored in nonvolatile (E²PROM) memory, and UTS will reset.
