Lightwave Communications
DVI Fiberlynx
www.lightwavecom.com
November
2001
5
The DVI Fiberlynx system provides keyboard emulation and carries the keyboard
and mouse signals through the Transmitter to the Receiver end. The Personality
Modules must be used as a matched set (e.g., PS/2 on both ends, or USB on
both ends, etc.). No 'breaks' are sent to the CPU (which might cause the CPU to
reset), even if the DVI Fiberlynx units lose power, as long as the keyboard cable
remains connected to the Transmitter.
The DVI
video record
(DDC) is maintained in the event the DVI Fiberlynx is
powered off, as long as the DVI input cable remains connected to the
Transmitter. The CPU, or its video output, does not need to be restarted in this
case.
2.0 Installation
Installation of the DVI Fiberlynx is simple and requires only simple hand tools.
Each Fiberlynx transmitter or receiver can be mounted in a standard 19-inch
rack, or may be placed on a bench or table.
The DVI Fiberlynx has been classified a CLASS 1 LASER Product in accordance
with standards IEC 60825-1 and IEC 60825-2. Always operate the product in
accordance with these instructions.
Do not open the DVI Fiberlynx cases; there are no adjustments or user-
serviceable parts inside.
DVI Fiberlynx Transmitter, showing LASER aperture locations
Caution: The DVI Fiberlynx Transmitter uses LASER devices which could
be harmful to your eyesight. The unit's metal case is designed to prevent a
direct line of sight with the output of the LASER devices to prevent such
injury. Do NOT look at the LASER outputs through your fiber optic cable or
through reflection off a shiny surface.
LASER Apertures (4)
Protective Shield
