●
WL-661G User Manual
Metric:
Select which metric you want to apply to this configuration.
Add:
Click to add the configuration to the static IP address table at the bottom of
the page.
Update:
Select one of the entries in the static IP address table at the bottom of
the page and, after changing parameters, click
Update
to confirm the changes.
Delete:
Select one of the entries in the static IP address table at the bottom of the
page and click
Delete
to remove the entry.
New:
Click
New
to clear the text boxes and add required information to create
a new entry.
3.4.2 Dynamic
This screen enables you to set NAT parameters.
NAT:
Click the radio buttons to enable or disable NAT.
Transmit:
Click the radio buttons to set the desired transmit parameters,
disabled, RIP 1, or RIP 2.
Receive:
Click the radio buttons to set the desired transmit parameters, disabled,
RIP 1, or RIP 2
32
© 2004 all rights reserved.
