●
WL-661G User Manual
3.2.3 Advanced
This screen enables you to configure advanced wireless functions.
Beacon Interval:
Type the beacon interval in the text box. You can specify a
value from 1 to 1000. The default beacon interval is 100.
RTS Threshold:
Type the RTS (Request-To-Send) threshold in the text box. This
value stabilizes data flow. If data flow is irregular, choose values between 256
and 2432 until data flow is normalized.
Fragmentation Threshold:
Type the fragmentation threshold in the text box.
If packet transfer error rates are high, choose values between 256 and 2432
until packet transfer rates are minimized.
(
NOTE
:
set this fragmentation threshold value may diminish system
performance
.)
DTIM Interval:
Type a DTIM (Delivery Traffic Indication Message) interval in
the text box. You can specify a value between 1 and 65535. The default value is
3.
TX Rates (MBps):
Select one of the wireless communications transfer rates,
measured in megabytes per second, based upon the speed of wireless adapters
connected to the WLAN.
11g only mode:
enable or disable.
Antenna Transmit Power:
Adjust the power of the antenna transmission by
selecting from the dropping list.
24
© 2004 all rights reserved.
