Lantech QL-400 Скачать руководство пользователя страница 64

Страница: 64 / 101

OPERATOR INSTRUCTIONS

6.6

Initialize the Machine

CAUTION
Before you initialize the machine, read “How to Stop the Machine”.

6.6.1

Lockout/Tagout Procedures

Obey these procedures to prevent an injury from unexpected energizing, start-up, release of
stored energy.

1. Move the Main Disconnect switch to the Off position.

2. Lock the Main Disconnect switch in the Off position.

3. Disconnect the power cord from the electrical outlet.

Lock the power cord

6.6.2

How to Stop the Machine

Push the E-stop.

This red button safely stops the operation of the machine.

Note:

Some machines have a remote Emergency Stop. It is important to know the location of

all E-stops before you operate the machine.

6.6.3

Apply the Power to the Machine

Move the Main Disconnect to the On position.

Reset the E-stop.

Push Reset.

The Reset button illuminates and all functions are available to the operator.

Содержание QL-400






































































































Результаты поиска

Содержание QL-400

Отзывы:

Lantech QL-400, Руководство пользователя, Страница: 64 / 101

Результаты поиска

Содержание QL-400

Отзывы: